Riverland Community College

This course introduces proven strategies and applications to help students achieve greater success in college and in life.  Topics include, but are not limited to, time management, goal setting, learning strategies, critical thinking, communication skills, diversity awareness, health and wellness, college and community resources, and financial planning.  This course introduces students to making choices that promote responsibility, motivation, interdependence, and self-awareness.  Recommended:  Score of 52 or above on test Accuplacer Reading Comprehension.
(1 Cr – 1 lect, 0 lab)

This course covers basic mathematics and elements of algebra that will prepare students for success in their specific technical areas. Students will develop their problem-solving skills and master mathematical concepts. Students will receive a grade for this course. Prerequisite: Appropriate placement in course based on Multiple Measures for Course Placement – Math Decision Band Chart. (2 Cr – 2 lect, 0 lab)

This course introduces general safety as it pertains to the machine shop. The course includes forklift safety, Occupational Safety Health Administration (OSHA) Right to Know, personal safety, and other safety topics. (2 Cr – 1 lect, 1 lab)

This course emphasizes Gas Metal Arc Welding (GMAW). The course includes the following major groups: power sources, wire feeders, torches, shielding gases, filler metals. Each one of these groups is covered in detail. Time is spent in the lab developing skills in using the process and setting up the equipment for the various applications. The focus of this course is on the use of wire feed welding equipment, application, and setup. Safety is a major consideration including welding equipment and the handling of various gases. Welding skills are developed through completion of welding projects. (3 Cr – 0 lect, 3 lab)

This course emphasizes applications for Gas Tungsten Arc Welding (GTAW\Heli-Arc) in the welding industry. Power sources, current types, current selection, shielding gases and torch types are also covered. Various procedures are discussed for welding different metals and problems that may be encountered. Safety procedures and the handling of high pressure cylinders, especially when using the GTAW, are covered. (3 Cr – 0 lect, 3 lab)

This course covers boiler functions, operations, safety, controls, hot water systems, steam systems, and the identification of boiler fittings.  This course is designed to help the student prepare for a special engineer’s license exam.  Students receive actual hands-on boiler operation experience, including boiler water testing.    

(4 Cr – 3 lect, 1 lab)

This course introduces the basic understanding of blueprint reading. Various mechanical drawings and types of prints for the interpretation and manufacturing of parts and the assembly of equipment are also included. (2 Cr - 2 lect, 0 lab)

This course introduces the fundamentals of machining. Students identify the machines’ principal parts and functions and perform basic machining operations such as facing, straight turning, boring, threading, and others. Students calculate speed and feeds. Shop safety is covered and practiced. (3 Cr – 0 lect, 3 lab)

This course emphasizes Preventive Maintenance (PM), the value of a good maintenance program, and the returns that can be expected with its implementation. Topics covered include maintenance checklists, PM costs, lost revenue costs, and starting an on-site PM program. The monitoring of equipment includes the use of infrared camera (thermography), laser alignment, vibration analysis, and oil analysis. This course is recognized as an Interstate Renewable Energy Council (IREC) ISPQ Accredited Training Program for curriculum covering the Job Task Analyses for Small Wind Installer (NABCEP). Prerequisites: IMMR 1715 and IMMR 1770. (3 Cr - 1 lect, 2 lab)

This course introduces basic piping practices and identification of fittings, appliances and fixtures including galvanized and black pipe, plastic pipe, and copper tubing. Students are required to follow blueprints to fabricate, install, and repair piping projects. (3 Cr – 1 lect, 2 lab)

given to sanitary and waste systems including proper venting. In lab actual plumbing situations that will be encountered, and students will solve plumbing installation problems. Other activities include using pipe, wrenches, identifying different types of pipe and fittings, and establishing proper draining. HVAC (heating, ventilation and air-conditioning) operational principles includes operating, testing and analyzing gas and oil-fired furnaces, hydronic heating systems, heat pump systems, air conditioning including installation practices and operations air distribution systems. This course will also cover indoor air quality measurements concerns and issues including comfort and psychometrics. Recommended skills and knowledge in electrical with mechanical aptitude.
(3 Cr – 2 lect, 1 lab)

This course covers fundamentals of refrigeration, tools and materials, basic refrigeration systems, compression systems, refrigerant controls, refrigerants, and small domestic applications. The course also includes the principles of installing and servicing small hermetic systems. The lab experiences include working with safe lab practices, tools, tubing, refrigeration system components, refrigerants, refrigerant recovery, recycle, reclaiming, system evacuations, and proper testing equipment usage. The course builds on the basic knowledge of refrigeration. systems.
(3 Cr – 2 lect, 1 lab)

This course is an introduction to Mechatronic Systems. The focus of this course is the application of mechanical power transmission to modern manufacturing equipment, used by machine assemblers, maintenance mechanics, field service personnel, engineers, manufacturing technicians and technical salespeople. Mechanical systems covered include chains, belts, couplings, gear reducers, shaft alignment, gear trains, linkages, bearings, and machine timing. Instruction uses hands-on projects in addition to demonstration and lecture on actual packaging machines. This course is part of a 2-course sequence that leads to students being eligible to take Packaging Machinery Manufacturers Institute’s (PMMI) Mechanical Components 1 test. This test is one of eight Mechatronics certifications offered by PMMI.
(3 Cr – 2 lect, 1 lab)

This course will expose the student to maintenance practices and industrial safety common to many of the potential fields within Mechatronics. Mechatronics is a broad field in Industrial Maintenance with many unique specialties requiring technicians to have exposure to multiple mechanical maintenance procedures. This course is one of two courses aligned to Packaging Machinery Manufacturers Institute’s (PMMI) Mechanical Components I Mechatronics Certification test. Throughout this course, students will apply concepts to hands-on labs to reinforce the discussed topics.
(2 Cr – 1 lect, 1 lab)

This course will expose the students in the field of Mechatronics to common motor control equipment utilized in industrial maintenance occupations. Students will construct and troubleshoot motor control circuits utilizing ladder logic. Students will utilize manual starters, 2-wire control circuits, and 3-wire control circuits. This basic knowledge of automation control equipment is expected of an entry-level technician working in facilities maintenance or assisting in the assembly, test, startup, troubleshooting, maintenance, repair or upgrade of basic manufacturing machinery modules. This course is one of three courses aligned to Packaging Machinery Manufacturers Institute’s (PMMI) Electricity 1 certification exam.
(3 Cr – 2 lect, 1 lab)

This course explores how mechatronic systems are utilized in industry. This course will focus on the packaging industry, but can be applied to manufacturing and product conveyance as a whole. A wide variety of machinery will be examined as well as the tooling necessary for basic component fabrication and part modification. Basic metalworking and welding concepts will be examined. Students will receive a hands-on experience leading to a greater understanding of how machinery operates, and the skills needed to successfully work with complex machinery in industry.
(3 Cr – 2 lect, 1 lab)

This course is designed for all students in the Manufacturing & Engineering Technology courses of study. Through the use of modern training systems students will gain an understanding of how electrical principles apply to automated production machines, packaging machinery, and robots. Students will demonstrate their ability to apply knowledge of electrical principles to increase sustainability and energy efficiency in a manufacturing environment. Through extensive hands-on use of digital meters and electrical tools students will be given the opportunity to perform wiring and setup operations and to troubleshoot electrical circuits. This course is part of a sequence of courses leading to Packaging Machinery Manufacturers Institute (PMMI) Industrial Electricity Certification.
(3 Cr – 2 lect, 1 lab)

The focus of this course is to provide hands-on learning opportunities using both real and virtual industrial robots. The main emphasis in the course will be focused on safely programming and operating industrial robots. Students will be exposed to various End of Arm Tooling, robot types, the historical trends of robotics, programming methods components of robotic systems, and multiple coordinate systems. These skills and concepts are utilized throughout all of manufacturing and in many other areas.
(2 Cr – 1 lect, 1 lab)

This course introduces the safety in the operation of high pressure boilers. Topics covered include boiler fittings, daily and monthly safety checks, operation and maintenance, feedwater accessories, steam accessories, turbines, and environmental control systems. This course is designed to prepare the student for a second-class high pressure boilers license. Prerequisites: IMMR 1720 or one year experience in boiler operation. (3 Cr – 2 lect, 1 lab)

This course covers basic hydraulic system principles including symbols, pumps, control valves, cylinders, and the reading and drawing of schematics. Disassembly and assembly of hydraulic components are also included. This course is recognized as an Interstate Renewable Energy Council (IREC) ISPQ Accredited Training Program for curriculum covering the Job Task Analyses for Small Wind Installer (NABCEP). (3 Cr - 1 lect, 2 lab)

The purpose of this course is to introduce students in all manufacturing fields to the manufacturing process. Students will examine the principles of manufacturing, manufacturing processes, the elements of automation, and the integration of manufacturing elements. These principles will be applied to manufacturing situations through the use of simulations, assembly of manufacturing systems, and through the use of robotics and Computer Integrated Manufacturing (CIM) equipment.
(3 Cr – 2 lect, 1 lab)

This course will introduce the student to Programmable Logic Controllers (PLC’s). This course will utilize Allen Bradley’s software suite and introduce the student to logic and machine control common in Mechatronics Systems. Topics include hardware and software composition of control systems, input/output interfacing, basic logic commands and common programming instructions. Knowledge of relay logic, ladder programming and input/output devices is needed to understand and maintain all types of common packaging equipment. This course is aimed at entry level technicians who may be involved in the assembly, test, start-up, troubleshooting, maintenance, repair or upgrade of basic packaging machinery modules. This course is the first in a series of two courses, which will prepare the student for Packaging Machinery Manufacturers Institute’s (PMMI) Mechatronics Certification Test for PLC Level 1.
(3 Cr – 2 lect, 1 lab)